Universal synchronous and asynchronous serial receiver and transmitter

Embedded Flash Service. The Enhanced Embedded Flash Controller ensures the interface of the Flash block with the bit internal bus. The Universal Asynchronous Receiver Transmitter features a two-pin UART that can be used for communication and trace purposes and offers an ideal medium for in-situ programming solutions. Universal Synchronous Asynchronous. Clock Management. Generic Clock Management.

Fig 3. There are two types of control word. Mode instruction is used for setting the function of the Mode instruction will be in "wait for write" at either internal reset or external reset.

That is, the writing of a control word after resetting will be recognized as a "mode instruction. Memory 2. NAND Flash 2. SDRAM 2. SRAM 3. Bus Matrix 4. Battery Backup 6. Serial Number 8. Clock Generation 8. Processor Clocks 8. Programmable Clocks 9. Function 9. Power Management Real-time Timer RTT Timer Counter TC Watchdog Timer JTAG Unit Two-wire Interface TWI Layout Description 1.

Layout Diagram 2. PortuxG20 Connector Description 2. Pin-header X1 2. X2 RJ45 Jack 2. X3 DC 5V 2. These are capable of transforming the parallel data in the serial form. USART is capable of conducting the whole process in the reverse order where serial data is injected, and the parallel form of the data is produced as a result. It is a Large Scale Integration device intended to manage the transmission of the asynchronous serial data.

The UART sits in the middle between the systems that manage the data in the parallel form and devices that handle data in an asynchronous serial form.